IBM Netfinity 3500 M10, Руководство пользователя

Страница: 41 / 268

system will not start. To save the configuration after adding or
removing hardware, or erasing passwords, complete the following
steps.
1. When you turn on the server, an error message indicating that a
configuration change has occurred appears approximately 30
seconds after the memory count numbers stop cycling in the
top-left corner of the screen. When the configuration error
message disappears, the POST Startup Errors screen appears,
and you are prompted to Continue or Exit Setup. Select
Continue
. (If you select Exit Setup, you will get another error
message.)
2. The Configuration/Setup Utility program menu appears with a
right arrowhead ( 5 ) next to the menu category in which the
configuration change has occurred. Select this menu item if you
want to view the new configuration settings, and then press Esc
to return to the Configuration/Setup Utility program menu.
3. Select Save Settings from the Configuration/Setup Utility
program menu.
4. Press Esc to exit from the Configuration/Setup Utility program,
and follow the instructions on the screen.
Chapter 3. Configuration/Setup Utility program
23