IBM Netfinity 3500 M10, Руководство пользователя

Страница: 155 / 268

Starting the Configuration/Setup Utility program
When you restart the server for the first time after working with
most options, a message appears indicating that a configuration
change has occurred. You are then prompted to enter the
Configuration/Setup Utility program to manually update the
configuration settings or to confirm and save the settings that were
automatically updated by the system programs.
After you change an option and restart the server, the following
screen might appear.
POST Startup Error(s)
The following error(s) were detected when the system was
started:
162 Configuration Change Has Occurred
Select one of the following:
Continue
Exit Setup
Note: Depending on the configuration changes that occurred, the
error message you see might be different from the one shown
here. If the preceding screen appears, select Continue until
you reach the Configuration/Setup Utility menu (see
“Changing settings and exiting” on page 140).
If the preceding screen does not appear, then use the following
procedures to access the Configuration/Setup Utility menu.
Chapter 5. Installing options
137