IBM Netfinity 3500 M10, Руководство пользователя

Страница: 76 / 268

6. Press Esc until you return to the Configuration/Setup Utility
program menu.
7. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility program menu.
8. To exit from the Configuration/Setup Utility program, press Esc
and follow the instructions on the screen.
Quick reference for network-related settings
The following tables are not intended to help determine which
settings to choose. They are only intended to help you quickly find
the steps necessary to get to the choices for specific network
settings. You can then view the current setting or select a different
setting. When finished, you can either save the settings and exit the
utility or exit without saving the settings.
The steps in the following tables always start at the
Configuration/Setup Utility main menu.
Table 1 (Page 1 of 4). Network-Related Settings
To Configure Select Comments/Notes
Remote
Administration 1. System Security
2. Remote
Administration
3. Remote
Administration
a
second time
4. Enabled or
Disabled
Enable Remote
Administration to
allow POST/BIOS
update over the
LAN.
Integrated Ethernet
and view the MAC
address 1. Devices and I/O
Ports
2. Ethernet Setup
3. Enabled or
Disabled
4. Network Boot
5. RPL or DHCP
If your model has an
integrated Ethernet
controller and you
install an optional
network adapter,
you must disable
Ethernet support.
58
Netfinity 3500 M10 User's Handbook