IBM i 830, Руководство по ремонту

Страница: 222 / 1000

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
1210 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the
iSeries Service Functions information.
Look in the Primary partition’s Service Action Log for a B6005090 during
the secondary partition IPL. Use that SRC and go to “Chapter 2. Unit
Reference Codes” on page 59.
If you do not find a B6005090 in the Service Action Log of the Primary
partition then look for any SRC which was logged during the IPL of the
Primary partition. Search the Service Action Log first and if you do not
find an SRC there then search the Product Activity Log. Use the new SRC
and go to “Chapter 2. Unit Reference Codes” on page 59.
FI00580
1220 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the
iSeries Service Functions information.
Initiate a Primary partition main storage dump then contact your next level
of support.
FI00099
1230 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. See the
iSeries Service Functions information.
This is a partitioning configuration problem. The partition is lacking the
necessary resources to IPL. Refer the customer to their software support.
FI00099
LPARCFG
1250 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the
iSeries Service Functions information.
The primary partition’s IPL mode does not allow the secondary partition to
IPL in the mode the secondary partition attempted to IPL in. If the primary
partition is IPL’d in ’C’ mode then secondary partitions can only IPL in ’C’
mode. Other modes are not allowed.
IPL the primary partition in either ’A’ mode or ’B’. Then retry the IPL of
the secondary partition.
LPARCFG
1260 A problem occurred during the IPL of a secondary partition
The secondary partition identified in the xx field of the B2xx SRC could not
IPL at the Timed Power On setting because the IPL mode of the secondary
partition was not set to Automatic or Normal.
Go into the
″
Work With System Partitions
″
option of SST/DST and reset
the IPL mode to Normal/Automatic, then re-IPL the secondary.
LPARSUP
1270 A problem occurred during the IPL of a secondary partition
The guest partition identified in the xx field of the B2xx SRC could not IPL
because the Primary partition was not in a full paging environment.
IPL the Primary partition past the Storage Management full paging IPL
step. Re-IPL the guest partition.
B2xx
208
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1