IBM i 830, Руководство по ремонту

Страница: 227 / 1000

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
6110 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Error on load-source device.
See the information about logical partitions. See the iSeries Service Functions
information.
Record the SRC. The Direct Select Address of the device IOP in the SRC.
Word 3: Bus, Word 4: Board, Word 5: Card.
FI00098
6900 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The guest partition’s allocated memory is not large enough for
the kernel specified to load. Increase the size of the secondary partition’s
memory allocation. Word 3 of the SRC is the allocated size of the
secondary partition and word 4 of the SRC is the required size of the
kernel.
LPARCFG
6905 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There is no valid kernel to load for the specified IPL Mode of
the guest partition. Either the kernel is not valid or there is not a kernel in
the selected IPL Mode. Verify that the kernel specified to load is valid and
the IPL mode specified is where the kernel is located. If the problem
persists then record all words of the SRC and contact your next level of
support.
LPARCFG
6910 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A storage management problem occurred loading the guest
partition. Record all the words of the SRC and contact your next level of
support.
LPARCFG
6920 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A problem occurred while loading the guest partition. Record
all the words of the SRC and contact your next level of support.
LPARSUP
6930 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A problem occurred while loading the guest partition. Record
all of the words in the SRC and contact your next level of support.
LPARCFG
7111 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Load-source device driver does not point to an IOP hardware
driver.
Read and understand the information about logical partitions. See the
iSeries Service Functions information.
Initiate a Primary partition main storage dump, and contact your next level
of support.
FI00099
B2xx
Chapter 2. Unit Reference Codes
213