IBM i 830, Руководство по ремонту

Страница: 361 / 1000

c. Go to “LIC-PIP 11” on page 350.
This ends the procedure.
7.
Does the SRC that sent you to this procedure appear on the console or on the
alternative console?
No Yes
↓
Go to step 9 of this procedure.
8. Does the IPL complete successfully to the IPL or Install the System display?
Yes No
↓
A different SRC occurred. Go to “Chapter 2. Unit Reference Codes” on
page 59 and use the new SRC to correct the problem.
This ends the procedure.
9. Perform the following:
a. Use the full-authority password to sign on to DST.
b. Search All logs in the product activity log looking for references of SRC
B600 5209 and the SRC that sent you to this procedure.
Note: Search only for SRCs that occurred during the last IPL.
Did you find B600 5209 or the same SRC that sent you to this procedure?
No Yes
↓
Go to step 13.
10. Did you find a different SRC than the one that sent you to this procedure?
Yes No
↓
The problem appears to be intermittent. Ask your next level of
support for assistance.
This ends the procedure.
11. Use the new SRC to correct the problem. See “Chapter 2. Unit Reference
Codes” on page 59.
This ends the procedure.
12. Use F11 to move through alternative views of the log analysis displays until
you find the card position and frame ID of the failing IOP associated with the
SRC.
Was the card position and frame ID available,
and did this information help
you find the IOP?
No Yes
↓
Go to step 15 of this procedure.
13. Perform the following:
a. Display the report for the log entry of the SRC that sent you to this
procedure.
b.
Display the additional information for the entry.
c. If the SRC is B6006910, use characters 9-16 of the top 16 character line of
function 13 (word 7) to find the card direct select address in BBBBCcbb
format.
BBBB Bus number
LIC PIPs
Chapter 3. Problem Isolation Procedures (PIPs), Failing Items, and Symbolic FRU Isolation
347