Gestetner G060, Руководство по обслуживанию

Страница: 964 / 1106

Copyright
   
2003 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
BULLETIN NUMBER: G060/G570 – 025 03/14/2003
APPLICABLE MODEL:
GESTETNER – DSC38/DSC38S
RICOH – AP3800C/AP3800CMF
SAVIN – SLP38C/SLP38CS
SUBJECT: REQUIRED ACTION FOR INSTALLING CF EXPANDER
SYMPTOM:
The right frame of the CF Rack can pinch the IPU connector, causing an SC error (mainly SC672) to occur,
or a blank operation panel display at power on.
ACTION:
Attach the cushion shown below to the backboard of the CF Rack before docking the rack and mainframe.
This cushion has been packed with the CF Expander Unit Starting with the serial numbers listed below.
NOTE 1:
When adhering the cushion to the backboard, make sure to position it flush against the surface of
the rear face of the right frame, just below the lowermost hole in the frame.
NOTE 2: The cushion must be attached regardless of what paper feed stations are installed (e.g. PFU, LCT)
and always in the position shown above.
UNITS AFFECTED:
All G570 printers manufactured after the serial numbers listed below will have the new style cushion installed
during production.
MODEL NAME SERIAL NUMBER
Gestetner DSC38/DSC38S P6720700025
Ricoh AP3800C/AP3800CMF P6720700025
Savin SLP38C/SLP38CS P6720700025
Not
e: Thi
s c
opy i
s i
ntended as a
m
ast
er ori
ginal
f
or reproduct
ion o
f addi
tion
al
bul
le
tin
s.
„
M
E
CHANI
CAL
Cushion
Lowermost hole
Right frame of the rack
Backboard of the rack