Gestetner G060, Руководство по обслуживанию

Страница: 552 / 1106

COPY SP MODE
G570 5-14 SM
1
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[Temperature Cor. 1] Fusing Temperature Correction (Correction Timing)
913
1 Sheet Setting *
BCU
Specifies the number of sheets to determine
whether or not to apply the fusing temperature
correction.
During a multi print job, the fusing temperature
tends to slightly overshoot around the 10th sheet
and then stabilize. Temperature overshooting may
cause the glossiness to increase.
To minimize the overshooting, both fusing and
pressure roller temperatures are decreased by the
amount specified in SP1-914 at the number of
sheets specified in this SP mode, until the end of
the job.
[ 1 to 60 / 10 / 1 sheet/step ]
[Temperature Cor. 2] Fusing Temperature Correction (Temperature Setting)
1 Heating
914
2 Pressure
*
BCU
Specifies the temperature to be subtracted from
the targeted temperatures specified in SP1-105-3
to-24.
[ 0 to 30 / 10 / 5
°
C /step ]
[Stand-by Time]
1 Job Receiving Specifies the time to shift the machine into the
stand-by mode when not receiving a print start
command after receiving a print preparation
command.
[ 0 to 180 / 60 / 10 seconds/step ]
0: The machine does not shift to the stand-by
mode.
915
2 Job End
*
BCU
Specifies the time to shift the machine into the
stand-by mode after the last job is completed.
[ 0 to 180 / 60 / 10 seconds/step ]
0: The machine does not shift to the stand-by
mode.
[Idling Mode]
1
Mode Set Enables or disables fusing unit idling. Idling is
done for the time specified in SP1-916-2 after the
machine enters the ready condition.
[ 0 or 1/ / 0 / - ] DFU
0: OFF
1: ON
2 Idling Time Specifies the time for the fusing unit idling.
[10 to 120 / 30 / 10 seconds/step ] DFU
916
3 Pre-Job Mode
*
BCU
Enables or disables fusing unit idling for 4
seconds before starting a print job.
[ 0 or 1/ / 0 / - ] DFU
0: OFF
1: ON