Gestetner G060, Руководство по обслуживанию

Страница: 1043 / 1106

TROUBLESHOOTING GUIDE
G060 4-46 SM
How to measure the gap between color
lines
When using a magnification scope, measure
the gap [A] between the two lines. Measure
from the same place on each line. For
example (see the illustration), measure
between the left edges of the lines.
Pattern 1
Color shift in the sub-scan direction at the
leading edge
This illustration shows that the colored (dotted)
line is above the black line. This means that
the registration roller speed is too high for the
paper used. Therefore, the registration roller
speed needs to be reduced by decreasing the
setting (percentage) of SP1-004-004, 005, and
SP1-005-003 depending on the mode selected.
•
SP1-004-004 Normal paper,
Color mode, 1200 dpi (62.5 mm/s)
•
SP1-004-005 Normal Paper,
Color mode, 600 dpi (125 mm/s)
•
SP1-005-003 Thick Paper (62.5 mm/s)
Pattern 2
Color shift in the sub-scan direction at the
trailing edge
This illustration shows that the colored
(dotted) line is above the black line. This
means that the fusing roller speed is too high
for the paper used. Therefore, the fusing
roller speed needs to be slower by
decreasing the setting (percentage) of SP1-
004-001, 002, or 007 depending on the mode
selected.
•
SP1-004-001 Normal paper,
Color mode, 1200 dpi (62.5 mm/s)
•
SP1-004-002 Normal Paper,
Color mode, 600 dpi (125 mm/s)
•
SP1-004-007 Thick Paper (62.5 mm/s)
A
A
G060T509.WMF
G060T504.WMF
G060T505.WMF
Magnification
scope
Black
line
Color
line
Rev. 09/2003