Gestetner G060, Руководство по обслуживанию

Страница: 1086 / 1106

Firmware History for G060
Page 9 of 16
CONTROLLER FIRMWARE HISTORY:
DESCRIPTION OF MODIFICATION
FIRMWARE
LEVEL
SERIAL
NUMBER
FIRMWARE
VERSION
CHECK
SUM
Installed from the first mass production run. G0605910 G
G0605911 G
July
2001
2.00 --
The following have been corrected:
“Asia” has been added to the destination
code.
G0605910 H
G0605911 H
July
2001
2.01 --
G0775910
G0775911 August
2001
(See Note 1)
2.04 -- The following problem has been corrected:
When designating the Finisher shift tray 1
for paper output tray as default, paper is not
fed out to shift tray 1.
The counter click up specification has been
changed as follows:
Old Specification:
Machine counts a page up as black or
color based on the color data sent from the
application. Therefore if a document from
the PC contains blank (but defined) spaces
highlighted in red, e.g., the controller
interprets this as color data and counts it as
a color print.
New Specification:
◆
The machine counts up the page as B/W or
color based on the CMYK data, i.e. the
actual toner colors used to develop the
image, regardless of the actual color data
from the application.
To meet the CPU specification change from
250MHz to 300MHz.
Color profile of the PCL driver has been
changed to Ver. 1.1.2a.
The following problem has been corrected.
B&W prints cannot be made if color toner is
empty.
HDD format cannot be done when SC860 is
detected.
CRD version of PS3 has been updated to
Ver. 1.2.1.
Presentation color profile version of PCL
has been updated to Ver. 1.2.1.
(Photographic color profile stays the same
as Ver. 1.1.2a.)
G0775910 A
G0775911 A
NA 2.05 13D2
7709
NOTE 1- The Meter Click counter specification has
been changed from the controller firmware (Ver.
2.04). The machines with Ver. 2.01 or older have
been reworked in local. However, some machines
have been released to the market without
modification. So, please make sure that the version
of the engine main firmware is “2.04” or later at
installation or next visit. If not, please update it to
the latest firmware.