Gestetner G060, Руководство по обслуживанию

Страница: 478 / 1106

OTHERS
G570 3-30 SM
3.6 OTHERS
3.6.1 TOUCH PANEL POSITION ADJUSTMENT
NOTE: It is necessary to calibrate the touch panel in the following cases:
•
When the operation panel is replaced.
•
When the NVRAM expansion board is replaced.
•
When the touch panel detection function is not working correctly
NOTE: Do not attempt to use items [2] to [9] on the Self-Diagnostic Menu. These
items are for design use only.
1. Press
T
, press , and then press
E
5 times to open the Self-
Diagnostics menu.
2. On the touch screen press “Touch Screen Adjust” (or press ).
3. Use a pointed (not sharp!) tool to press the upper left mark .
4. Press the lower right mark after it appears.
5. Touch a few spots on the touch panel to confirm that the marker (
+
) appears
exactly where the screen is touched.
If the
+
mark does not appear where the screen is touched, press Cancel and
repeat from Step 2.
6. When you are finished, press [#] OK on the screen (or press ).
7. Touch [#] Exit on the screen to close the Self-Diagnostic menu and save the
calibration settings.
G570R903.WMF
G570R904.WMF