Gestetner G060, Руководство по обслуживанию

Страница: 646 / 1106

IMAGE PROCESSING
G570 6-14 SM
Main Scan Magnification
While the machine changes the scanner speed to reduce or enlarge the original in
the sub-scan direction, the ASIC2 chip on the IPU board handles reduction and
enlargement in the main scan direction.
•
Scanning and laser writing are done at a fixed pitch (CCD elements cannot be
squeezed or expanded).
•
Imaginary points are calculated, corresponding to a physical enlargement or
reduction.
•
Image density is then calculated for each of the imaginary points based on the
image data for the nearest two true points.
•
The calculated data then becomes the new (reduced or enlarged) image data.
NOTE: The actual calculations for main scan magnification use the polynomial
convolution method. This mathematical process is beyond the scope of a
service manual and will not be covered here.