Gestetner G060, Руководство по обслуживанию

Страница: 1087 / 1106

Firmware History for G060
Page 10 of 16
DESCRIPTION OF MODIFICATION
FIRMWARE
LEVEL
SERIAL
NUMBER
FIRMWARE
VERSION
CHECK
SUM
G0775910 A
G0775911 A
October
2001
(See Note 2)
2.05A 28E0
176D
The following have been corrected:
(This problem occurs only when selecting
German language.)
When selecting the meter click mode and
printing the counter sheet from the user
program mode, the message of “Color” and
“Black” is printed in the other way around.
The following have been corrected:
When all memory clear (SP5-801-001 or
002) is done, the destination code is
cleared to “0 (Japan)”. Since Japanese
fonts are not stored for the messages,
strange characters appear.
When printing A3+ (12”x18”) size
documents, the image is not shift to center,
causing a big white margin at the trailing
edge.
G0775910 B
G0775911 B
October
2001
2.06 A556
B965
The following have been corrected:
PS configuration page printing is now
limited to plain or recycled paper
(previously, it could be printed out onto any
paper type).
The following has been fixed:
Selecting a custom paper size in the PCL
may, in rare cases, cause the PC to freeze.
G0775910 B
G0775911 B
NA 2.07 --
The following have been corrected:
If the output tray becomes full while the
machine is receiving print job data in Series
Print mode, following tray-full recovery, the
remaining pages may be printed out in the
wrong order.
G0775910 C
G0775911 C
NA 2.08 --
The following have been corrected:
Paper is not punched at the designated
position in Series Print mode.
Letterhead Mode has been added.
G0775910 D
G0775911 D
January
2002
2.11 CCB1
2519
The following have been corrected:
While downloading PS fonts to a machine
with the HDD option installed, the correct
PS serial number cannot be output.
G0775910 E
G0775911 E
NA 2.12 --
NOTE 2- Messages “Color” and “Black” in the
meter click counter is reversibly displayed on the
screen and print out only when German
language is selected. The machines with Ver.
2.05 or older have been reworked in local.
However, some machines have been released to
the market without modification. If the machine is
set to German language, please make sure that
the version of the engine main firmware is
“2.05A” or later at installation or next visit. If not,
please update it to the latest firmware.