Gestetner G060, Руководство по обслуживанию

Страница: 272 / 1106

PAPER FEED
G060 6-42 SM
6.6.4 PAPER SIZE DETECTION – TRAYS 1 & 2
For tray 1, there is no size switch. The paper size is fixed at either A4 or LT; this
can be changed with SP1-902-1.
For tray 2, four paper size switches, working in combination, detect the paper size
as shown in the table below. The actuators are on the side plate [A]. The side plate
is moved by the end plate [B] through a cam [C].
Models Switch Location
North America Europe/Asia 1 [D] 2 [E] 3 [F] 4 [G]
11" x 17" SEF 11" x 17" SEF 0 1 0 0
A3 SEF A3 SEF 1 0 1 0
8
1/2
" x 14" SEF *1 B4 SEF *1 1 1 0 1
8
1/2
" x 11" SEF *2 A4 SEF *2 0 1 1 0
11" x 8
1/2
" LEF *3 11" x 8
1/2
" LEF *3 1 0 1 1
A4 LEF A4 LEF 0 1 0 1
B5 LEF B5 LEF 0 0 1 0
A5 LEF A5 LEF 0 0 0 1
1: Pushed
Notes:
*1: The machine detects either 8½” x 14” SEF or B4 SEF, depending on the setting of SP 1-902-2
*2: The machine detects either 8½” x 11” SEF or A4 SEF, depending on the setting of SP 1-902-3
*3: The machine detects either 11” x 8½” LEF or B5 SEF, depending on the setting of SP 1-902-4
The machine disables paper feed from a tray if the paper size cannot be detected
(if the paper size actuator is broken or no tray is installed).
G060D104.WMF
[A]
[B]
[C]
[D]
[E] [F]
[G]