Gestetner G060, Руководство по обслуживанию

Страница: 933 / 1106

FIRMWARE HISTORY
SM 14-7 G060
Firmw
are
Histo
ry
DESCRIPTION OF MODIFICATION
FIRMWARE
LEVEL
SERIAL
NUMBER
FIRMWARE
VERSION
G0775910 A
G0775911 A
October
2001
(See Note 2)
2.05A
!
The following problem has been fixed.
(This problem occurs only when selecting
German language.)
When selecting the meter click mode and
printing the counter sheet from the user
program mode, the message of “Color” and
“Black” is printed in the other way around.
The following problem has been fixed.
!
When all memory clear (SP5-801-001 or
002) is done, the destination code is
cleared to “0 (Japan)”. Since Japanese
fonts are not stored for the messages,
strange characters appear.
!
When printing A3+ (12”x18”) size
documents, the image is not shift to center,
causing a big white margin at the trailing
edge.
G0775910 B
G0775911 B
October,
2001
2.06
!
PS configuration page printing is now
limited to plain or recycled paper
(previously, it could be printed out onto any
paper type).
!
The following has been fixed:
Selecting a custom paper size in the PCL
may, in rare cases, cause the PC to freeze.
G0775910 B
G0775911 B
NA 2.07
The following has been fixed:
!
If the output tray becomes full while the
machine is receiving print job data in Series
Print mode, following tray-full recovery, the
remaining pages may be printed out in the
wrong order.
G0775910 C
G0775911 C
NA 2.08
The following has been fixed:
!
Paper is not punched at the designated
position in Series Print mode.
!
Letterhead Mode has been added.
G0775910 D
G0775911 D
January,
2002
2.11
The following has been fixed:
!
While downloading PS fonts to a machine
with the HDD option installed, the correct
PS serial number cannot be output.
G0775910 E
G0775911 E
NA 2.12
NOTE 2- Messages “Color” and “Black” in
the meter click counter is reversibly
displayed on the screen and print out only
when German language is selected. The
machines with Ver. 2.05 or older have been
reworked in local. However, some machines
have been released to the market without
modification. If the machine is set to
German language, please make sure that
the version of the engine main firmware is
“2.05A” or later at installation or next visit. If
not, please update it to the latest firmware.
Rev. 10/2002