Gestetner G060, Руководство по обслуживанию

Страница: 825 / 1106

F
ax Un
it
G
307
FAX COMMUNICATION FEATURES
SM 4-13 G307
Transfer Box
The user can create transfer boxes in the machine’s memory for forwarding
incoming fax messages. Each box must have a name and a code. Each box must
also have destinations associated with it; any message arriving in this box will
automatically be sent on to these destinations.
If a sender knows the code that was used to create a transfer box, they can specify
this as the SUB code during transmission. The message will then go to this transfer
box, and will be sent on to the transfer destinations associated with that transfer
box.
If the sender also sends a SID code, the SID code stored in the receiver must be
the same or the communication will be disconnected.
Items to program at the receiving machine
Items Note
SUB Code (Box number) Required
Box name Required
Password (SID) Optional
Receiver (Final destinations) Required (Quick Dial)
Items for the sender to specify when setting up the transmission
Items Note
SUB Code (Box number) Required (must be the same as the code
that was used to set up the transfer box)
Password (SID) Optional
NOTE: 1) 5 destinations can be programmed with Group or Quick Dial as the
delivery destinations.
2) More than 5 destinations are available if a Group is specified as one of
the destinations.
3) If the SID does not match, the communication is disconnected.
4) A result report is not sent back to the transmitter but it is printed on the
receiving machine.