Gestetner G060, Руководство по обслуживанию

Страница: 598 / 1106

COPY SP MODE
G570 5-60 SM
7
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
[PM Counter Clear]
(Unit, [Color])
Dev.: Development Unit, PF: Paper Feed Rollers, Transfer: Transfer Unit
1 PCU [K]
2 PCU [Y]
3 PCU [M]
4 PCU [C]
5 Dev. [K]
6 Dev. [Y]
7 Dev. [M]
8 Dev. [C]
9 Oil Supply
10 PF By-pass
11 PF Tray 1
12 PF Tray 2
13 PF Tray 3/LCT
14 PF Tray 4
15 Fusing
16 Transfer
804
50 All
*
BCU
Clears the PM counter.
Press the Enter key after the machine asks
“Execute?”.
When a unit is replaced, the machine
automatically detects that the new unit is installed.
Then, the current PM counter value is
automatically moved to the b PM Counter -
Previous (SP7-906-1 to 25) and is reset to “0”.
NOTE: The LCT is counted as the 3rd feed
station.
[Counter Clear]
808
1 Counter Clear Clears all counters.
NOTE 1 after the SP table for a list of
settings cleared.
[Access Code Clear] 810
1 Access Code Clear Use to clear the access code if the customer
forgets the code (password).
[Tray Counter Clear]
1 Tray 1
2 Tray 2
3 Tray 3/LCT
4 Tray 4
816
6 Duplex
Clears the counters (SP7-204) for the number of
sheets fed from the paper feed stations.
NOTE: The LCT is counted as the 3rd feed
station.
[Co. Clear: Mag.] Counter Clear :Magnification
822
1 Co. Clear: Mag. Clear the copy counters classed by magnification
mode (SP7-301).
[Counter Reset]
825
1 Counter Reset Rests the total counter values to “0”.
NOTE: This SP mode can be done only once,
while the counter values are less than 0.
[Diag. Result] Diagnostic Result 832
1 Diag. Result Displays the result of the diagnostics.
[Coverage] Image Coverage Ratio & No. of Toner Cartridges
1 Last [K]
2 Last [C]
3 Last [M]
4 Last [Y]
Displays the image coverage ratio for each color
of the last output.
[ 0 to 100.00 / - / 0.01 %/step ]
5 Average [K]
6 Average [C]
7 Average [M]
833
8 Average [Y]
*
BCU
Displays accumulated average value of image
coverage ratio for each color.
[ 0 to 100.00 / - / 0.01 %/step ]