Gestetner G060, Руководство по обслуживанию

Страница: 590 / 1106

COPY SP MODE
G570 5-52 SM
[DF Magnification Adj.] DF Magnification Adjustment
017
1 DF Magnification Adj. *
NV
Adjusts the magnification in the sub-scan direction
for the ARDF.
[ -5.0 to 5.0 / 0 / 0.1 %/step ]
[Punch Position]
1 Punch 1
110
2 Punch 2
*
BCU
Adjusts the punching position.
Punch 1
US: 2 punch holes
Europe: 2 punch holes
North Europe: 4 punch holes
Punch 2
US: 3 punch holes
Europe: 4 punch holes
Increment: Holes move toward the paper center.
Decrement: Holes move toward the paper edge.
[ -7.5 to 7.5 / 0 / 0.5 mm/step ]
[Staple Position] 111
1 Staple Position *
BCU
Adjusts the stapling position.
Increment: Staple position moves toward the edge
of paper.
Decrement: Staple position moves toward the
center of paper.
[ -3.5 to 3.5 / 0 / 0.5 mm/step ]
NOTE: Although the adjustable range is
±
3.5 mm,
the stapling position can be changed only by 1.0
mm when stapling one position at the front or rear
side even when the input value is more than 1.0.
[Multi Bin Set] 901
1 Multi Bin Set *
BCU
Specifies whether or not the optional multi-bin
output tray is installed. When installing the multi-
bin output tray, this SP mode should be set to “1”.
[ 0 or 1 / 0 / - ]
0: Not installed
1: Installed