Gestetner G060, Руководство по обслуживанию

Страница: 1089 / 1106

Firmware History for G060
Page 12 of 16
DESCRIPTION OF MODIFICATION
FIRMWARE
LEVEL
SERIAL
NUMBER
FIRMWARE
VERSION
CHECK
SUM
The following have been corrected:
The printing speed of a PS job slows down
after a PS3 job is reset.
G0775910 H
G0775911 H
July
2002
2.16 F270
7677
The following have been corrected:
When paper size error occurs using PCL
printing, the printer error message of SNM
for Client is not displayed on the PC
G0775910 J
G0775911 J
September
2002
2.17 9A5A
BDF1
The following have been corrected:
PCL- Slow Printing from AutoCAD.
PS- Euro symbol is not printed.
Please refer to “PUB (C) – 045 EURO
SYMBOL NOT PRINTED WITH PS
DRIVER” for the procedure of how to fix this
issue.
PS print file is printed as text.
G0775910 K
G0775911 K
October
2002
2.18 2A77
4BAB
The following have been corrected:
After using User Tool on operation panel,
PCL print jobs may keep showing
"Printing..." on operation panel.
Form Lines value (under PCL Menu)
change after reboot the Machine.
PCL:
Response to PJL INFO CONFIG command
does not include serial number.
The print may stop during the processing of
the file when using "INFICO".
The work area of RAM is reduced whenever
fonts that have been downloaded to HDD
are used
PS:
16bit color blend data does not print
correctly.
Slow Printing from AutoCAD.
Printing may not work correctly when a
protocol other than EtherTalk is used on
Macintosh 8.x/9.x.
The printer controller locks-up when printing
from Unix Acrobat.
Lines may be printed on the blank pages.
The error log is not described in
“Configuration Page” when the punch error
occurred.
When data is sent that outputs 3 hole punch
to the European models (which supports
2&4 hole punch), output has 2-hole punch.
(Now output has no punch).
Printing on envelope may not work
correctly.
PJL:
Response to PJL INFO CONFIG command
does not include serial number.
G0775910 L
G0775911 L
December
2002
2.19 1421
2E85