Gestetner G060, Руководство по обслуживанию

Страница: 651 / 1106

Copie
r
F
eat
u
re
E
x
pa
nde
r
G
570
SCANNER FUNCTIONS
SM 6-19 G570
6.4 SCANNER FUNCTIONS
6.4.1 IMAGE PROCESSING FOR SCANNER MODE
The image processing for scanner mode is done in the IPU chip on the BICU
board. The IPU chip chooses the most suitable image processing methods
(gamma tables, dither patterns, etc) depending on the settings made in the driver.
The image compression method for binary picture processing can be selected with
scanner SP1-004 (either MR, MH, or MMR). For grayscale processing, JPEG is
used.
Whether the user selects the image mode using the driver (TWAIN mode) or from
the operation panel (Delivery mode), the IPU chip does the image processing using
the appropriate image processing methods mentioned above.
Image Data Path
1. Image Store/Image Delivery Mode
The user can select the following modes from the LCD.
1) Delivery only
2) Store only
3) Store and delivery
After image processing and image compression, all image data for the job are
stored in the printer controller HDD using TIFF file format (binary picture
processing) or JPEG file format (grayscale processing). The type of TIFF format
used depends on the user’s scanner settings.
When delivery mode is selected, the controller creates a file which contains the
destination and page information, then the controller sends the file to a server.
2. Twain Mode
After image processing and image compression, the data (RAW or JPEG) is
sent to the scanner Twain driver directory on the computer.
Controller SBU
I m a g e
Scanning
Server
H D D
File
IPU
I m a g e
Processing
I m a g e
Compression
NIB
G570D905.WMF
Controller S B U
I m a g e
S c a n n i n g
Image
IPU
I m a g e
P r o c e s s i n g
I m a g e
C o m p r e s s i o n
N I B
P C
G570D906.WMF