Gestetner G060, Руководство по обслуживанию

Страница: 556 / 1106

COPY SP MODE
G570 5-18 SM
2
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
LD Power Control for CF ([Color Mode, Color]
101
CF:[K,K] 1 [ 0 to 1023 / 604 / 1/step ] DFU
102 CF:[K,K] 2
[ 0 to 1023 / 604 / 1/step ] DFU
103 CF[FC,K]
[ 0 to 1023 / 720 / 1/step ] DFU
104 CF:[FC:Y]
[ 0 to 1023 / 720 / 1/step ] DFU
105 CF:[FC,M] [ 0 to 1023 / 720 / 1/step ] DFU
106 CF:[FC,C] [ 0 to 1023 / 720 / 1/step ] DFU
107 CF:[K] OHP/TH [ 0 to 1023 / 590 / 1/step ] DFU
108 CF:[Y] OHP/TH [ 0 to 1023 / 590 / 1/step ] DFU
109 CF:[M] OHP/TH [ 0 to 1023 / 590 / 1/step ] DFU
103
110 CF:[C] OHP/TH
*
BCU
[ 0 to 1023 / 590 / 1/step ] DFU
[LD Beam Pitch] LD Beam Pitch
Sets the beam pitch for black in 1200 dpi or 600 dpi mode.
NOTE: After replacing the laser optics housing unit, the data printed on the decal attached
to the new unit must be input with this SP mode.
2 Pitch 1200 [ 0 to 255 / 50 / 50 pulse/step ] FA
3 Pitch 600
*
BCU
[ 0 to 255 / 42 / 50 pulse/step ] FA
5 Display 1200 [ 0 to 255 / - / 1 pulse/step ]
109
6 Display 600 [ 0 to 255 / - / 1 pulse/step ]
[Polygon OFF Timing 1] Polygon Mirror Motor OFF Timing 1
1 Warming-up The polygon mirror motor turns off if the machine
receives no print start command for the time
specified in this SP mode after receiving the print
preparation command.
[ 0 to 60 / 10 / 1 second/step ]
0: Not turned off except for Energy Saver mode
112
2 Job End
*
BCU
The polygon mirror motor turns off if the machine
receives no print job for the time specified in this
SP mode after the previous job was completed.
[ 0 to 60 / 1 / 1 second/step ]
0: Not turned off except for Energy Saver mode
[Polygon OFF Timing 2] Polygon Mirror Motor OFF 2 113
1 Polygon OFF Timing 2 The polygon mirror motor does not turn on until
the printer enters the ready condition even after
receiving the print start command.
[ 0 or 1 / 1 / 1 /step ]
0: Enable, 1: Disable
NOTE: When a user complains about high
frequency noise, enabling this mode can
minimize the noise.
[Development Bias] ([Color], Process Speed)
1 [K] 62.5
2 [K] 125
3 [K] 185
4 [Y] 62.5
5 [Y] 125
6 [M] 62.5
7 [M] 125
8 [C] 62.5
201
9 [C] 125
*
BCU
Adjusts the development bias.
Development bias is automatically adjusted during
process control; therefore, adjusting these settings
has no effect while Process Control (SP3-125
Default: ON) is activated.
After deactivating Process Control with SP3-125,
the values in these SP modes are used for
printing.
[ 200 to 800 / 500 / 10 V/step ] DFU