Fuji Xerox DocuPrint C5005 d, Руководство пользователя

Страница: 440 / 462

440
A Appendix
• From a security perspective, the machine cannot abort (forcibly terminate) image log
creation to give priority to store data.
• Searching for images and print job logs allows the system administrator to grasp the
identification information of the user who instructed the job. Note that Fuji Xerox is not
responsible for a privacy issue of the user caused by using the Image Log Control feature.
• In the event of forced power failure such as a blackout or a hard disk failure, it is not
guaranteed the image logs are securely created and/or transferred.
• Only the jobs performed after the start of the Image Log Control feature will be covered
by the Image Log Control feature.
• Because the images to be controlled are created based on the input images, the images
will not always be the same as the output images. The following information is added or
edited during output; thus, the images will not be reflected.
• Layout change during output
• Separator
• Annotation
• Force Annotation
• Watermark
• Secure Watermark
• Form Overlay (Print)
• The maximum size of PDL created as image is 500MB per job.
• If the machine runs out of hard disk space for storing images, the machine operates in
accordance with the setting of [Assurance Level] as follows.
• [High]: A job is cancelled.
• [Low]: A job is executed. However, the warning will be displayed at the end of the job
and notifies the user that the image creation failed.
• Up to 200 image logs can be stored in the machine.
Allow User to Disable Active Settings
This feature cannot be applied to the ordinary print jobs. This feature is applicable to Private
Charge Print job.
Login to Remote Accounts
• Only the services that can be instructed from the display (Charge Print and Private
Charge Print) are restricted by the Login to Remote Accounts feature. You cannot restrict
the output color* or the number of pages.
* If ApeosWare Authentication Agent (purchase separately) or ApeosWare
Authentication Management (purchase separately) is used as an authentication system,
you can restrict the output color.
• In this feature, Print cannot be restricted. To restrict print operations, use the Charge Print
or Private Charge Print feature.
• When you change Login Type to or from [Remote Accounts], user information registered
on the machine will be deleted.
When Using Login to Remote Accounts
• Up to 32 single byte characters can be used for registering a user ID to login to a Remote
Accounts server.