EXFO FTB-1 Скачать руководство пользователя страница 560

Страница: 560 / 675

Test Control

548

FTB-700G/800 Series

Report Button



Report Headlines and Content

parameters are used to identify the

report and are not mandatory. Up to 30 characters are allowed for each
parameter.



Report Header

could be the company name.



Report Title

could be the name of the product, name of test, test

number, etc.



Optional Content

allows to choose the optional content that can

be part of the report:

All

(default) includes all optional content to the report.

None

excluded all optional content from the report.

Custom

allows to select the optional content to be part of the

report.



Choose Content

, available when the

Optional Content

is set to

Custom

, allows to select what will be part of the custom content.



Save Report



Auto-Generate File Name

check box, when selected (default),

automatically generates the report file name which contains the
name of the test, the date (YY.MM.DD), and time (HH.MM.SS).
Clear the

Auto-Generate File Name

check box to enter a specific

file name.

File Name

is the name of the report to be generated.



Save To

is the media where the report file will be saved:

Internal

Storage

(default), or

Removable Disk

available only when there is a removable disk/key connected to
the FTB-1 USB port.

Internal Storage

specifies to save the report in

Documents\810-880-NetBlazer\Reports



Display Report after Saving

check box when selected (default)

automatically displays the report once it is generated.

Note:

Once generated, the report can be opened from the

Open Tab

on page 549.

Содержание FTB-1




































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FTB-1

Отзывы:

Бренды по названию

Популярные бренды

EXFO FTB-1, Руководство пользователя

Результаты поиска

Содержание FTB-1

Отзывы:

Бренды по названию

Популярные бренды