manualshive.com logo in svg

EXFO FTB-1, Руководство пользователя

Поделиться
Скачать
EXFO FTB-1 Скачать руководство пользователя страница 35

Physical Interfaces and LEDs

NetBlazer

23

ETHERNET 100/1000M (PORT #1/#2)

ETHERNET 100/1000M (PORT #1/#2)

The ETHERNET 100/1000M PORT #1 can be used for the following test 
application and optical rates: 

Plug the SFP transceiver into the 

ETHERNET 100/1000M

 PORT #1 or PORT 

#2 slot. 

Note:

Do not replace a SFP while the test is running to avoid distorting statistics. 
First stop the test case, replace the SFP and then restart the test.

Application

Rates

PORT

#1 #2

Ethernet

100Mbit/s, 1000 Mbit/s

X

X

Packet Sync

100Mbit/s, 1000 Mbit/s

X

X

Fibre Channel

1X, 2X, 4X

X

X

Wireless

CPRI 1.2288, 2.4576, 3.072, 4.9152, 6.1440 Gbit/s;
OBSAI 3.072 Gbit/s.

X

X

W

ARNING

Use only EXFO supported transceivers. Refer to this product’s 
technical specifications at 

www.exfo.com

 for the list of supported 

transceivers. Using non-supported transceivers can affect the 
performance and accuracy of the test.

Содержание FTB-1




































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды