Endress+Hauser Proline Promag W 500, Руководство по эксплуатации

Страница: 252 / 262

Technical data Proline Promag W 500 PROFINET
252 Hauser
CE mark The device meets the legal requirements of the applicable EU Directives. These are listed in
the corresponding EU Declaration of Conformity along with the standards applied.
Hauser confirms successful testing of the device by affixing to it the CE mark.
Ex approval The devices are certified for use in hazardous areas and the relevant safety instructions are
provided in the separate "Safety Instructions" (XA) document. Reference is made to this
document on the nameplate.
Pharmaceutical
compatibility
• FDA
• USP Class VI
• TSE/BSE Certificate of Suitability
Drinking water approval • ACS
• KTW/W270
• NSF 61
• WRAS BS 6920
Certification PROFINET PROFINET interface
The measuring device is certified and registered by the PNO (PROFIBUS User
Organization). The measuring system meets all the requirements of the following
specifications:
• Certified according to:
• Test specification for PROFINET devices
• PROFINET Security Level 2 – Netload Class
• The device can also be operated with certified devices of other manufacturers
(interoperability)
• The device supports PROFINET S2 system redundancy.
Radio approval The measuring device has radio approval.
For detailed information regarding radio approval, see Special Documentation
Measuring instrument
approval
The measuring device is qualified to OIML R49: 2013 OIML R117 and has an OIML
Certificate of Conformity (optional).
Other standards and
guidelines
• EN 60529
Degrees of protection provided by enclosures (IP code)
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory
use - general requirements
• IEC/EN 61326
Emission in accordance with Class A requirements. Electromagnetic compatibility (EMC
requirements).
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control
equipment
• NAMUR NE 32
Data retention in the event of a power failure in field and control instruments with
microprocessors
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters
with analog output signal.