Endress+Hauser Proline Promag W 500, Руководство по эксплуатации

Страница: 73 / 262

Proline Promag W 500 PROFINET Electrical connection
Hauser 73
Power
I/O 2
I/O 3
I/O 3
4.
1 2 3 4 5 6 7 8
128
64 32 16
8 4
2 1
Name of Station
3.
-
+
-
ESC
2.
Power
open
press
open
press
ESC
E
+
-
I/O 4
Power
I/O 2
I/O 3
1.
A0034497
1. Loosen the 4 fixing screws on the housing cover.
2. Open the housing cover.
3. Fold open the terminal cover.
4. Set the desired device name using the corresponding DIP switches on the
I/O electronics module.
5. Reverse the removal procedure to reassemble the transmitter.
6. Reconnect the device to the power supply.
 The configured device address is used once the device is restarted.
Setting the device name: Proline 500
Risk of electric shock when opening the transmitter housing.
‣
Before opening the transmitter housing:
‣
Disconnect the device from the power supply.
The default IP address may not be activated →  75.
1
2
3
4
5
6
7
8
128
64
32
16
8
4
2
1
N
ame of S
tat
ion
A0034498
1. Depending on the housing version, loosen the securing clamp or fixing screw of the
housing cover.
2. Depending on the housing version, unscrew or open the housing cover and
disconnect the local display from the main electronics module where necessary .
3. Set the desired device name using the corresponding DIP switches on the
I/O electronics module.
4. Reverse the removal procedure to reassemble the transmitter.