Endress+Hauser Proline Promag W 500, Руководство по эксплуатации

Страница: 137 / 262

Proline Promag W 500 PROFINET Commissioning
Hauser 137
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Assign process variable – Select process variable for low
flow cut off. • Off
• Volume flow
• Mass flow
• Corrected volume
flow
Volume flow
On value low flow cutoff A process variable is selected
in the
Assign process variable
parameter (→  137).
Enter on value for low flow cut
off. Positive floating-
point number Depends on country
and nominal
diameter
Off value low flow cutoff A process variable is selected
in the
Assign process variable
parameter (→  137).
Enter off value for low flow cut
off. 0 to 100.0 % 50 %
Pressure shock suppression A process variable is selected
in the
Assign process variable
parameter (→  137).
Enter time frame for signal
suppression (= active pressure
shock suppression). 0 to 100 s 0 s