Endress+Hauser Proline Promag W 500, Руководство по эксплуатации

Страница: 131 / 262

Proline Promag W 500 PROFINET Commissioning
Hauser 131
Parameter Prerequisite Description Selection / User
interface / User
entry
Factory setting
Switch-off delay • The Switch option is
selected in the Operating
mode parameter.
• The Limit option is selected
in the Switch output
function parameter.
Define delay for the switch-off
of status output. 0.0 to 100.0 s 0.0 s
Failure mode – Define output behavior in
alarm condition. • Actual status
• Open
• Closed Open
Invert output signal – Invert the output signal. • No
• Yes No
* Visibility depends on order options or device settings
10.5.10 Configuring the relay output
The Relay output wizard guides the user systematically through all the parameters that
have to be set for configuring the relay output.
Navigation
"Setup" menu → Relay output 1 to n
‣
RelaisOutput 1 to n
Switch output function →  132
Assign flow direction check →  132
Assign limit →  132
Assign diagnostic behavior
→  132
Assign status →  132
Switch-off value →  132
Switch-on value
→  132
Failure mode →  132