Endress+Hauser Proline Promag W 500, Руководство по эксплуатации

Страница: 161 / 262

Proline Promag W 500 PROFINET Operation
Hauser 161
Navigation
"Diagnostics" menu → Measured values → Totalizer 1 to n
‣
Totalizer 1 to n
Assign process variable →  161
Totalizer value 1 to n →  161
Totalizer status 1 to n
→  161
Totalizer status (Hex) 1 to n →  161
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
Assign process variable – Select process variable for
totalizer. • Volume flow
• Mass flow
• Corrected volume
flow
• Total mass flow
• Condensate mass
flow
• Energy flow
• Heat flow
difference
Volume flow
Totalizer value 1 to n In the Assign process variable
parameter one of the following
options is selected:
• Volume flow
• Mass flow
• Corrected volume flow
• Total mass flow
• Condensate mass flow
• Energy flow
• Heat flow difference
Displays the current totalizer
counter value. Signed floating-point
number 0 m³
Totalizer status 1 to n – Displays the current totalizer
status. • Good
• Uncertain
• Bad –
Totalizer status (Hex) 1 to n In Target mode parameter,
the Auto option is selected.
Displays the current status
value (hex) of the totalizer. 0 to 0xFF –
11.4.3 "Input values" submenu
The Input values submenu guides you systematically to the individual input values.