Endress+Hauser Proline Promag W 500, Руководство по эксплуатации

Страница: 254 / 262

Technical data Proline Promag W 500 PROFINET
254 Hauser
Cleaning
Package Description
Electrode cleaning circuit
(ECC) The electrode cleaning circuit (ECC) function has been developed to have a solution
for applications where magnetite (Fe
3
O
4
) deposits frequently occur (e.g. hot
water). Since magnetite is highly conductive this build up leads to measuring errors
and ultimately to the loss of signal. The application package is designed to AVOID
build up of highly conductive matter and thin layers (typical of magnetite).
16.14 Accessories
Overview of accessories available for order →  218
16.15 Supplementary documentation
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• W@M Device Viewer ( www.endress.com/deviceviewer ): Enter the serial number
from nameplate
• Hauser Operations App : Enter the serial number from the nameplate or
scan the 2D matrix code (QR code) on the nameplate
Standard documentation Brief Operating Instructions
Brief Operating Instructions for the sensor
Measuring device Documentation code
Proline Promag W KA01266D
Brief Operating Instructions for transmitter
Measuring device Documentation code
Proline 500 – digital KA01349D
Proline 500 KA01348D
Technical Information
Measuring device Documentation code
Promag W 500 TI01227D
Description of device parameters
Measuring device Documentation code
Promag 500 GP01119D
Device-dependent
additional documentation
Safety instructions
Safety instructions for electrical equipment for hazardous areas.
Contents Documentation code
ATEX/IECEx Ex i XA01522D
ATEX/IECEx Ex ec XA01523D