Endress+Hauser Proline Promag W 500, Руководство по эксплуатации

Страница: 117 / 262

Proline Promag W 500 PROFINET Commissioning
Hauser 117
Mass unit →  117
Density unit →  117
Corrected volume flow unit →  118
Corrected volume unit
→  118
Parameter overview with brief description
Parameter Prerequisite Description Selection Factory setting
Volume flow unit – Select volume flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• l/h
• gal/min (us)
Volume unit – Select volume unit. Unit choose list Country-specific:
• m³
• gal (us)
Conductivity unit The On option is selected in
the Conductivity
measurement parameter
parameter.
Select conductivity unit.
Effect
The selected unit applies for:
Simulation process variable
Unit choose list µS/cm
Temperature unit – Select temperature unit.
Result
The selected unit applies for:
•
Temperature parameter
• Maximum value parameter
• Minimum value parameter
• External temperature
parameter
• Maximum value parameter
• Minimum value parameter
• Fail-safe value external
temperature
parameter
Unit choose list Country-specific:
• °C
• °F
Mass flow unit – Select mass flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• kg/h
• lb/min
Mass unit – Select mass unit. Unit choose list Country-specific:
• kg
• lb
Density unit – Select density unit.
Result
The selected unit applies for:
• Output
• Simulation process variable
Unit choose list Country-specific:
• kg/l
• lb/ft³