manualshive.com logo in svg

Dell PowerConnect W-AirWave 7.6, Руководство пользователя

У нас вы можете бесплатно скачать руководство пользователя Dell PowerConnect W-AirWave 7.6. Этот мануал поможет вам лучше понять наш продукт и использовать его эффективно. Посетите manualshive.com для скачивания.

Поделиться
Скачать
background image

234 | Performing Daily Administration in AirWave

Dell PowerConnect W-AirWave 7.6 | User Guide

watched AirWave will be unable to restore properly. If any of the watched AMPs are not on the same version of
AirWave, you will need to upgrade. The Failover AMP will need HTTPS access (port 443) to the watched AMP to
verify that the web page is active and to fetch downloads.

Once the Failover AMP determines that the Watched AMP is not up (based on the user-defined missed poll
threshold) it will restore the data backup of the Watched AMP and begin monitoring the watched AMP APs and
devices. There are many variables that affect how long this will take including how long client historical data is being
retained, but for an AMP with 1,000 APs it might take up to 10 minutes. For an AMP with 2,500 APs, it might
take as long as 20 minutes. The Failover AMP will retain its original IP address.

In summary, the Failover AMP could take over for the Watched AMP in as little as five minutes; it might take up to
an additional 10-20 minutes to unpack the watched AMP data and begin monitoring APs. The most important
factors are the missed poll threshold, which is defined by the user, and the size of the watched AMP backup, which
is affected by the total number of APs and by the amount of data being saved, especially client historical data.

To restore the Watched AMP, run the backup script from the command line and copy the current data file and the
old Watched AMP configuration file to the Watched AMP. Then run the restore script. More information about
backups and restores can be found in

"Backing Up AirWave" on page 232

.

Setting

Default

Description

IP/Hostname

None

The IP address or Hostname of the watched AMP.
The Failover AMP needs HTTPS access to the watched AMPs.

Username

None

A username with management rights on the watched AMP.

Password

None

The password for the username with management rights specified above.

HTTP Timeout
(5-1000 Sec)

60

The amount of time before AirWave considers a polling attempt failed.

Polling Enabled

Yes

Enables or disables polling of the Watched AMP.

NOTE:

You do not need to disable polling of the watched AMP system if it is set to be down

during nightly maintenance or is being upgraded.

Polling Period

5
minutes

The amount of time between polls of the Watched AMP.

Missed Poll
Threshold

None

The number of polls that can be missed before the failover AMP will begin actively
monitoring the Watched AMP APs.

Table 125:

Home > Watched Page Fields and Default Values

NOTE: When selecting a backup file, be sure to select the one that is most relevant, whether that is failover-as-AMP or failover-as-

failover. An AirWave acting as a failover keeps its nightly backups in

/var/airwave-backup

, and the backups of watched AMPs are

stored in

/var/airwave-backup/watched_amps

. In the event of a failover, a new backup-as-failover is made and placed in

/var/airwave-backup/watcher

. However, the existing backups-as-failover in

/var/airwave-backup

remains there until they are aged out

by standard rotation.

Logging out of AirWave

To log out of AirWave, select the

Logout

link on the upper right hand corner of every AirWave page.

You will be logged off automatically based on the number of minutes set in the

Idle Timeout

setting of

Home >

User Info

. Refer to

"Setting Up Login Configuration Options" on page 34

.

Содержание PowerConnect W-AirWave 7.6













































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerConnect W-AirWave 7.6

360 Systems MAXX-2400-HD Specification preview
MAXX-2400-HD
Бренд: 360 Systems Страницы: 8
Qlogic iSR6200 Quick Start Manual preview
iSR6200
Бренд: Qlogic Страницы: 20
Obvius AcquiLite EMB Installation And Operation Manual preview
AcquiLite EMB
Бренд: Obvius Страницы: 29
Supermicro SUPERSERVER 5018A-MHN4 User Manual preview
SUPERSERVER 5018A-MHN4
Бренд: Supermicro Страницы: 116
IBM 8676 - Eserver xSeries 335 Hardware Maintenance Manual And Troubleshooting Manual preview
8676 - Eserver xSeries 335
Бренд: IBM Страницы: 172
ADLINK Technology DLAP-201 Series User Manual preview
DLAP-201 Series
Бренд: ADLINK Technology Страницы: 39
Intel S7000FC4UR - Server System - 0 MB RAM Configuration Manual preview
S7000FC4UR - Server System - 0 MB RAM
Бренд: Intel Страницы: 13
Infrant Technologies ReadyNAS NV Getting Started Manual preview
ReadyNAS NV
Бренд: Infrant Technologies Страницы: 8
JIEYUN TECHNOLOGY J60 User Manual preview
J60
Бренд: JIEYUN TECHNOLOGY Страницы: 25
Extreme Networks ExtremeControl IA-A-305 Installation Manual preview
ExtremeControl IA-A-305
Бренд: Extreme Networks Страницы: 31
Extreme Networks EC8200A01-E6 Installation Manual preview
EC8200A01-E6
Бренд: Extreme Networks Страницы: 94
Planet FPS-3121G User Manual preview
FPS-3121G
Бренд: Planet Страницы: 74
Dataton WATCHPAX 60 User Manual preview
WATCHPAX 60
Бренд: Dataton Страницы: 37
Black Box LS1001A Specifications preview
LS1001A
Бренд: Black Box Страницы: 3
Promise Technology Vess A Series Product Manual preview
Vess A Series
Бренд: Promise Technology Страницы: 259
Vitek VT-IPSD102H - Manual preview
VT-IPSD102H -
Бренд: Vitek Страницы: 55
Gigabyte G182-C20 User Manual preview
G182-C20
Бренд: Gigabyte Страницы: 108
Red Hat NETWORK SATELLITE 5.0.0 - Installation Manual preview
NETWORK SATELLITE 5.0.0 -
Бренд: Red Hat Страницы: 84

Бренды по названию

Популярные бренды

Загрузить еще бренды