50 | Configuring AirWave
Dell PowerConnect W-AirWave 7.6 | User Guide
4. Select
Specified Discovery
, and enter the IP address of the Primary WDS device (AP or WLSM).
5. Enter the
Username
and
Password
for the WLSE server.
Primary or Secondary WDS
Perform these steps to configure primary or secondary functions for WDS.
1. Go to the
Wireless Services > WDS > General Setup
page.
2. If the AP is the Primary or Backup WDS, select
Use the AP as Wireless Domain Services
.
n
Select
Priority
(set
200
for Primary,
100
for Secondary).
n
Configure the
Wireless Network Manager
(configure the IP address of WLSE).
3. If the AP is Member Only, leave all options unchecked.
4. Go to the
Security > Server Manager
page.
5. Enter the
IP address
and
Shared Secret
for the ACS server and select
Apply
.
6. Go to the
Wireless Services > WDS > Server Group
page.
7. Enter the
WDS Group
of the AP.
8. Select the
ACS server
in the
Priority 1
drop-down menu and select
Apply
.
Configuring ACS for WDS Authentication
ACS authenticates all components of the WDS and must be configured first. Perform these steps to make this
configuration.
1. Login to the ACS.
2. Go to the
System Configuration > ACS Certificate Setup
page.
3. Install a New Certificate by selecting the
Install New Certificate
button, or skip to the next step if the
certificate was previously installed.
4. Select
User Setup
in the left frame.
5. Enter the
Username
that will be used to authenticate into the WDS and select
Add/Edit
.
6. Enter the
Password
that will be used to authenticate into the WDS and select
Submit
.
7. Go to the
Network Configuration > Add AAA Client
page.
8. Add
AP Hostname
,
AP IP Address
, and
Community String
(for the key).
9. Enter the
Password
that will be used to authenticate into the WDS and select
Submit
.
For additional and more general information about ACS, refer to
"Configuring ACS Servers " on page 52
.
Configuring Cisco WLSE Rogue Scanning
The
AMP Setup > WLSE
page allows AirWave to integrate with the Cisco Wireless LAN Solution Engine
(WLSE). AirWave can discover APs and gather rogue scanning data from the Cisco WLSE.
Figure 30
illustrates and itemizes the AirWave settings for communication that is enabled between AirWave and
WLSE.
Содержание PowerConnect W-AirWave 7.6
