Dell PowerConnect W-AirWave 7.6, Руководство пользователя

Страница: 191 / 332

Using RAPIDS Rules with Additional AirWave Functions
Rules that you configure on the RAPIDS > Rules page establish an important way of processing rogue devices on
your network, and flagging them for attention as required. Such devices appear on the following pages in AirWave,
with additional information:
l
RAPIDS > List —Lists rogue devices as classified by rules.
l
RAPIDS > Rules —Displays the rules that classify rogue devices.
l
RAPIDS > Overview —Displays general rogue device count and statistical information.
l
System > Triggers —Displays triggers that are currently configured, including any triggers that have been defined
for rogue events.
l
Reports > Definitions —Allows you to run New Rogue Devices Report with custom settings.
l
VisualRF —Displays physical location information for rogue devices.
Viewing Rogues on the RAPIDS > List Page
To view a rogue AP, select the RAPIDS > List tab and select a rogue device type from the Minimum
Classification drop-down menu (see Figure 121 ). You can sort the table columns (up/down) by selecting the column
head. Most columns can be filtered using the funnel icon ( ). The active links on this page launch additional pages
for RAPIDS configuration or device processing.
Figure 121:
RAPIDS > List Page Illustration (partial view)
Table 100 details the column information displayed in Figure 121 . For additional information about RAPIDS rules,
refer to "Defining RAPIDS Rules" on page 174 .
Column Description
Ack
Displays whether or not the rogue device has been acknowledged. Devices can be acknowledged
manually or you can configure RAPIDS so that manually classifying rogues will automatically
acknowledges them. Additionally, devices can be acknowledged by using
Modify Devices
link at the
top of the RAPIDS > List page. Rogues should be acknowledged when the AirWave user has
investigated them and determined that they are not a threat (see "RAPIDS Setup" on page 171 ).
RAPIDS
Classification Displays the current RAPIDS classification. This classification is determined by the rules defined on
the
RAPIDS > Rules
page.
Threat Level
This field displays the numeric threat level of the device, in a range from 1 to 10. The definition of
threat level is configurable, as described in
"Rogue Device Threat Level" on page 175 .
The threat level is also supported with Triggers (see
"Monitoring and Supporting AirWave with the
System Pages" on page 187
).
Name
Displays the alpha-numeric name of the rogue device, as known. By default, AirWave assigns each
rogue device a name derived from the OUI vendor and the final six digits of the MAC address.
Clicking the linked name will redirect you to the
RAPIDS > Detail page for that rogue device. Refer to
"Overview of the RAPIDS > Detail Page" on page 181
.
Table 100:
RAPIDS > List Column Definitions
Dell PowerConnect W-AirWave 7.6 | User Guide Using RAPIDS and Rogue Classification | 179