Danfoss VACON NX, Инструкция по применению

Страница: 98 / 360

Index Parameter Min Max Unit Default ID Description
10 = Jogging spd selected
11 = At speed
12 = Mot. regulator active
13 = Freq. limit 1 superv.
14 = Freq. limit 2 superv.
15 = Torque limit superv.
16 = Ref. limit supervision
17 = External brake control
18 = I/O control place act.
19 = AC drive temp. limit superv.
20 = Reference inverted
21 = Ext. brake control inverted
22 = Therm. fault or warn.
23 = On/Off control
24 = Fieldbus DIN 1
25 = Fieldbus DIN 2
26 = Fieldbus DIN 3
27 = Temp.Warning
P2.3.1.2
Digital output 1 function 0 29
-
1 312
VACON
®
NXS drives only:
28 = Temp.Fault
VACON
®
NXP drives only:
29 = ID.Bit
P2.3.1.3
Digital output 1 on delay 0.00 320.00 Varies 0.00 487
-
P2.3.1.4
Digital output 1 off delay 0.00 320.00 Varies 0.00 488
-
VACON
®
NXP drives only
P2.3.1.5 INV Delayed DO1 0 1
-
0 1587 0 = No
1 = Yes
P2.3.1.6 ID Bit Free DO1 0.0 200.15
-
0.0 1217
-
P2.3.1.7
DO1 Time Scale 0 2 - 0 1060
0 = s
1 = min
2 = h
1 Use the Terminal to Function method (TTF) with these parameters, see 10.626 "Terminal to Function" (TTF) Programming Principle .
Table 64: Delayed Digital Output 2 (Control Panel: Menu M2 -> G2.3.2)
Index Parameter Min Max Unit Default ID Description
P2.3.2.1
Digital output 2 signal selection 0.1 E.10
-
0.1 489
-
P2.3.2.2
Digital output 2 function 0 29
-
0 490 See P2.3.1.2
P2.3.2.3
Digital output 2 on delay 0.00 320.00 Varies 0.00 491
-
P2.3.2.4
Digital output 2 off delay 0.00 320.00 Varies 0.00 492
-
AB296635287482en-000301 / DPD00903 98 | Danfoss A/S © 2023.02
Multi-purpose Control Application
VACON® NX All-in-One
Application Guide