Danfoss VACON NX, Инструкция по применению

Страница: 42 / 360

Index Parameter Min Max Unit Default ID Description
P2.6.14.11 Start-up torque 0 3
-
0 621 0 = Not used
1 = Torque memory
2 = Torque reference
3 = Start-up torque fwd/rev
P2.6.14.12 Start-up torque FWD -300.0 300.0 % 0.0 633
-
P2.6.14.13 Start-up torque REV -300.0 300.0 % 0.0 634
-
P2.6.14.15 Encoder filter time 0.0 100 ms 0.0 618
-
P2.6.14.17 Current control P gain 0.00 100.00 % 40.00 617
-
Identification parameter group 2.6.15
P2.6.15.1 Speed step -50.0 50.0
-
0.0 1252
-
1 Parameter value can only be changed after the AC drive has been stopped.
4.4.8 Protections (Control Panel: Menu M2 -> G2.7)
Table 22: Protections, G2.7
Index Parameter Min Max Unit Default ID Description
P2.7.1 Response to 4 mA reference fault 0 5
-
0 700 0 = No response
1 = Warning
2 = Previous Freq.
3 = Wrng+Preset- Freq 2.7.2
4 = Fault, stop acc. to 2.4.7
5 = Fault, stop by coasting
P2.7.2 4 mA reference fault frequency 0.00 P2.1.2 Hz 0.00 728
-
P2.7.3 Response to external fault 0 3
-
2 701 0 = No response
1 = Warning
2 = Fault, stop acc. to 2.4.7
3 = Fault, stop by coasting
P2.7.4 Input phase supervision 0 3
-
0 730
P2.7.5 Response to undervoltage fault 0 1
-
0 727 0 = Fault stored in history
1 = Fault not stored
P2.7.6 Output phase supervision 0 3
-
2 702 0 = No response
1 = Warning
2 = Fault, stop acc. to 2.4.7
3 = Fault, stop by coasting
P2.7.7 Earth fault protection 0 3
-
2 703
P2.7.8 Thermal protection of the motor 0 3
-
2 704
P2.7.9 Motor ambient temperature factor -100.0 100.0 % 0.0 705
-
P2.7.10 Motor cooling factor at zero speed 0.0 150.0 % 40.0 706
-
AB296635287482en-000301 / DPD00903 42 | Danfoss A/S © 2023.02
Local/Remote Control Application
VACON® NX All-in-One
Application Guide