Danfoss VACON NX, Инструкция по применению

Страница: 189 / 360

•
•
•
•
•
•
B Maximum value of signal selected with ID 307
Maximum output signal = Minimum set value
Minimum output signal = Maximum set value
See
10.71 (ID 311) Analog Output 1 Scale .
10.70 (ID 310) Analog Output 1 Minimum
Location in the menu:
P2.3.5 (Standard Application, Local/Remote Control Application, Multi-Step Speed Control Application, PID Control Application)
P2.3.5.5
(Multi-Purpose Control Application)
P2.3.3.5 (Pump and Fan Control Application)
Use this parameter to set the minimum value of the analog output 1 signal.
The parameter defines the signal minimum to either 0 mA or 4 mA (living zero). Note the difference in analog output scaling in
parameter
ID 311 .
10.71 (ID 311) Analog Output 1 Scale
Location in the menu:
P2.3.6 (Standard Application, Local/Remote Control Application, Multi-Step Speed Control Application, PID Control Application)
P2.3.5.6 (Multi-Purpose Control Application)
P2.3.3.6
(Pump and Fan Control Application)
Use this parameter to set the scaling factor for the analog 1 output.
Signal Max. value of the signal
Output frequency Max frequency (parameter ID102)
Freq. Reference Max frequency (parameter ID102)
Motor speed Motor nom. speed 1xn
mMotor
Output current Motor nom. current 1xI
nMotor
Motor torque Motor nom. torque 1xT
nMotor
Motor power Motor nom. power 1xP
nMotor
Motor voltage 100% x U
nmotor
DC-link voltage 1000 V
PI-ref. value 100% x ref. value maximum
PI act. value 1 100% x actual value maximum
PI act. value 2 100% x actual value maximum
PI error value 100% x error value maximum
PI output 100% x output maximum
AB296635287482en-000301 / DPD00903 | 189 Danfoss A/S © 2023.02
Parameter Descriptions
VACON® NX All-in-One
Application Guide