Danfoss iC2, Инструкция по применению

Страница: 122 / 292

P 4.1.6 Frequency
View the actual motor frequency value.
Default value:
0.0
Parameter type:
Range (0.0–6553.5)
Parameter
number:
1613
Unit:
Hz
Data type:
uint32
Access type:
Read
P 4.1.7 Frequency %
View the actual motor frequency as a percentage of P 5.8.2 Motor Speed High Limit .
Default value:
0.0
Parameter type:
Range (0–6553.5)
Parameter
number:
1615
Unit:
%
Data type:
uint16
Access type:
Read
P 4.1.8 Motor Shaft Speed
View the actual motor RPM. In open loop or closed-loop process control the motor RPM is estimated. In speed closed-loop modes the
motor RPM is measured.
Default value:
0
Parameter type:
Range (-30000.0–30000.0)
Parameter
number:
1617
Unit:
RPM
Data type:
int32
Access type:
Read
P 4.1.10 Motor Torque
View the torque value with sign, applied to the motor shaft. Some motors supply more than 160% torque. As a result, the minimum value
and the maximum value depend on the maximum motor current and the motor used.
Default value:
0.0
Parameter type:
Range (-30000.0–30000.0)
Parameter
number:
1616
Unit:
Nm
Data type:
int32
Access type:
Read
P 4.1.11 Motor Torque %
View the torque in percent of nominal torque, with sign, applied to the motor shaft.
Default value:
0
Parameter type:
Range (-200–200)
Parameter
number:
1622
Unit:
%
Data type:
int16
Access type:
Read
122
| Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters