Danfoss iC2, Инструкция по применению

Страница: 125 / 292

Application Guide | iC2-Micro Frequency Converters
Parameter
number:
143
Unit:
Ft
Data type:
uint16
Access type:
Read/Write
In some products, depending on the EMC configuration, this parameter may adjust the allowable switching frequency automatically to
achieve optimum performance of the drive system.
7.5.2.2
Nameplate Data (Menu Index 4.2.2)
P 4.2.2.1 Nominal Power
Set the nominal motor power from the motor nameplate data. Note: Changing this parameter affects the settings of other parameters.
Default value:
Size Related
Parameter type:
Range (Size Related)
Parameter
number:
120
Unit:
kW
Data type:
uint16
Access type:
Read/Write
P 4.2.2.2 Nominal Voltage
Set the nominal motor voltage from the motor nameplate data. Note: Changing this parameter affects settings of other parameters.
Default value:
Size Related
Parameter type:
Range (50–1000)
Parameter
number:
122
Unit:
V
Data type:
uint16
Access type:
Read/Write
P 4.2.2.3 Nominal Current
Enter the nominal motor current value from the motor nameplate data. Note: Changing this parameter affects the settings of other
parameters.
Default value:
Size Related
Parameter type:
Range (0.01–1000.00)
Parameter
number:
124
Unit:
A
Data type:
uint32
Access type:
Read/Write
P 4.2.2.4 Nominal Frequency
Select the motor frequency value from the motor nameplate data. Note: Changing this parameter affects settings of other parameters.
Default value:
Size Related
Parameter type:
Range (Size Related)
Parameter
number:
123
Unit:
Hz
Data type:
uint16
Access type:
Read/Write
P 4.2.2.5 Nominal Speed
Enter the nominal motor speed value from the motor nameplate data. Note: Changing this parameter affects settings of other
parameters.
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 |
125