Danfoss iC2, Инструкция по применению

Страница: 258 / 292

Selection number Selection name
5 57600 Baud
6 76800 Baud
7 115200 Baud
P 10.1.4 Parity/Stop Bits
Parity and stop bits for the protocol using the FC port. For some of the protocols, not all options are available.
Default value:
0 [Even Parity, 1 Stop Bit]
Parameter type:
Selection
Parameter
number:
833
Unit:
–
Data type:
enum
Access type:
Read/Write
The following are the selections for the parameter.
Selection number Selection name
0 Even Parity, 1 Stop Bit
1 Odd Parity, 1 Stop Bit
2 No Parity, 1 Stop Bit
3 No Parity, 2 Stop Bits
P 10.1.5 Maximum Response Delay
Specify the maximum allowed delay time between receiving a request and transmitting the response. If this time is exceeded, no
response will be returned.
Default value:
Size Related
Parameter type:
Range (0.100–10.000)
Parameter
number:
836
Unit:
s
Data type:
uint16
Access type:
Read/Write
P 10.1.6 Minimum Response Delay
Specify the minimum delay time between receiving a request and transmitting a response. This is used for overcoming modem
turnaround delays.
Default value:
0.010
Parameter type:
Range (1–500)
Parameter
number:
835
Unit:
s
Data type:
uint16
Access type:
Read/Write
258
| Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters