Danfoss iC2 Скачать руководство пользователя страница 29

Страница: 29 / 292

Application Guide | iC2-Micro Frequency Converters

3.2.5

Control Panel 2.0 OP2 Buttons and Indicators

Figure 9: Control Panel 2.0 OP2 Overview

Table 7: Control Panel Elements Description

Legend

Name of element

Description

Display

Provides access to content and settings. The display provides detailed information about the sta-
tus of the drive.

Home/Menu

• Toggles between status view and main menu.
• Long press to access the shortcut menu for quickly reading and editing parameters.

Arrows and [OK]

•

Arrows

: Navigate within the different screens and menus, and tune the parameter values.

•

[OK]

: Confirms selections and data in the control panel display.

Info

Provides drive information by pressing the

Info

button from the home screen, for example, the

drive type, ordered model code, drive serial number, application version.

Stop/Reset

Stops the operation of the drive.

OFF LED

The indicator has the following states:

•

Steady on:

The indicator is in this state when:

- The drive is not modulating and the drive is coasted.
- The stop or coast signal is applied. Ramp times, protections, and stopping functions might

prolong this state.

•

Off:

The drive is in operation, a start signal is applied, and the output is active. This also

includes ramping, running on reference, and AMA.

Содержание iC2





































































































































































































































































































Результаты поиска

Содержание iC2

Отзывы:

Похожие инструкции для iC2

Бренды по названию

Популярные бренды

Danfoss iC2, Инструкция по применению

Результаты поиска

Содержание iC2

Отзывы:

Похожие инструкции для iC2

Бренды по названию

Популярные бренды