Danfoss iC2, Инструкция по применению

Страница: 189 / 292

Application Guide | iC2-Micro Frequency Converters
P 6.1.3 Running Hours
Use this parameter to view how many hours the motor has run. Reset the counter with P 6.1.9 Reset Running Hours Counter . The value is
saved when the drive is turned off.
Default value:
0
Parameter type:
Range (0–2147483647)
Parameter
number:
1501
Unit:
h
Data type:
uint32
Access type:
Read
P 6.1.4 kWh Counter
Register the power consumption of the motor as an average value over 1 hour. Reset the counter in P 6.1.8 Reset kWh Counter .
Default value:
0
Parameter type:
Range (0–2147483647)
Parameter
number:
1502
Unit:
kWh
Data type:
uint32
Access type:
Read
P 6.1.5 Power Up's
Use this parameter to view the number of times the frequency converter has been powered up.
Default value:
0
Parameter type:
Range (0–2147483647)
Parameter
number:
1503
Unit:
–
Data type:
uint32
Access type:
Read
P 6.1.6 Over Temp's
Use this parameter to view the number of frequency converter temperature faults that have occurred since production.
Default value:
0
Parameter type:
Range (0–65535)
Parameter
number:
1504
Unit:
–
Data type:
uint16
Access type:
Read
P 6.1.7 Over Volt's
Use this parameter to view the number of frequency converter overvoltages that have occurred since production.
Default value:
0
Parameter type:
Range (0–65535)
Parameter
number:
1505
Unit:
–
Data type:
uint16
Access type:
Read
P 6.1.8 Reset kWh Counter
Use this parameter to reset the kWh counter to zero (see P 6.1.4 kWh Counter ).
Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254 |
189