6-5
Chapter 6. OPERATION
●
●
Display 6
When the remaining number of cycles is “0”, subsequent cycle
operation is not carried out.
●
●
Display 7
The digit to which SP values can be entered blinks in the MANUAL
mode when programmer functions are selected. Either of “h:min”
or “min:s” is selected as the time unit in setup settings. Select either
“remaining segment time” or “total operating time” in setup set-
tings as the details whose time is to be displayed.
PV
CYC
PV
Number of remaining cycles
Program No. Segment No.
Pattern
tendency
Output states of events 1 to 3, time events 1 to 5
SP
TM
SP
Time
Program No. Segment No.
Pattern
tendency
Output states of events 1 to 3, time events 1 to 5
