Azbil DCP31, Руководство пользователя

Страница: 15 / 242

xiii
Chapter 9. MAINTENANCE & TROUBLESHOOTING
9-1
9 - 1 Maintenance 9-1
9 - 2 Self-diagnostics and Alarm Code Display 9-2
■ ■
Self-diagnostics at power ON 9-2
■ ■
Self-diagnostics at each sampling cycle 9-2
■ ■
Intermittent self-diagnostics during operation 9-3
■ ■
Self-diagnostics only when certain functions are operating 9-3
■ ■
Alarm code display 9-3
■ ■
Alarm categories 9-4
9 - 3 Trouble during Key Entry 9-5
■ ■
The program No. does not change by pressing in basic dis-
play state 9-5
■ ■
The program No. does not change by pressing in the basic
display state 9-5
■ ■
The controller does not change to RUN mode by pressing in
the basic display state 9-5
■ ■
The controller does not change to HOLD mode by pressing
in the basic display state 9-5
■ ■
The controller cannot be reset by pressing + in the
basic display state 9-6
■ ■
The program is not advanced by pressing + in the basic
display state 9-6
■ ■
The controller does not change to FAST mode by pressing +
in the basic display state 9-6
■ ■
The controller does not change to MANUAL mode by pressing
in the basic display state 9-7
■ ■
The controller does not change to AUTO mode by pressing in
the basic display state 9-7
■ ■
Auto-tuning (AT) is not started by pressing in the basic dis-
play state 9-7
■ ■
Auto-tuning (AT) is not canceled by pressing in the basic dis-
play state 9-7
■ ■
Setting group other than “
P A R A
” is not displayed by pressing
by selecting the setting group in parameter set state 9-7
■ ■
Setting group other than “
S E T
” is not displayed by pressing
by selecting the setting group in parameter set state 9-8
■ ■
The controller does not enter the setting entry state by pressing
in the parameter setup state 9-8
■ ■
The controller does not change to setup group selection state
and setting entry state continues by pressing
in parameter
setting entry state 9-8
■ ■
The controller does not change to program setup state by press-
ing
+ in the basic display state 9-8