8-17
Chapter 8. PROGRAM SETUP
●
●
Display
• The settings are common to all segments as the pattern link items
are setting items provided for each program.
• When setup data
C
7
1
is set to 1, pattern link items on the pro-
gramming map are skipped and not displayed.
■
Deleting programs
(1) In the setting display state, move to the pattern item of the seg-
ment from which the program is to deleted on the programming
map.
To delete all the segments of a particular program, move to the
No.1 segment.
(2) If you press
ENT
, the upper display starts blinking to indicate
start of entry to the No.1 setup.
(So far, the procedure is the same as that for setting the pattern
item.)
(3) If you press
FUNC
+
CLR
, the display changes to confirm clearing
of the program, and “
C
L
R
.
” is displayed blinking in the upper
display.
(4) Press
ENT
to execute deletion of the program.
(5) The
DCP31
returns to the setting display state, both the upper
and lower displays change to “- - - -” to indicate no setting.
Link destination program No.
Program No. Segment No.
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
P.L
I
N
