8-4
Chapter 8. PROGRAM SETUP
●
●
Description of mode transition states (see page 8-2.)
(1) Program setup is entered.
(2) Setup item on programming map is moved.
(3) Segment on programming map is moved.
(4) Entry of the No.1 setup is started.
(5) No.1 setting value incremented/decremented, and blinking
digit is moved.
(6) Entry of No.1 setup is completed.
ENT
stores the value being entered to memory.
With items having a No.2 setup, entry of the No.2 setup value
is started. When the item does not have a No.2 setup, the setup
display is returned to.
When
FUNC
+
CLR
are pressed at an event/time event item, the
setting for that segment is cleared.
When
FUNC
+
CLR
are pressed at a G.Soak item, the setting for
that segment is cleared.
(7) Pressing
FUNC
+
CLR
for a pattern item causes “
C
L
R
.
” to blink
to confirm clearing of the program from that segment onwards.
However, note that
FUNC
+
ENT
is disabled for currently run-
ning programs.
(8)
ENT
clears the program from that segment onwards.
DISP
does not clear the program and the setting display is
returned to.
(9) No.2 setup setting value incremented/decremented, and blink-
ing digit moved.
(10) Entry of No.2 setup is completed.
ENT
stores the value being entered to memory.
When
FUNC
+
CLR
are pressed at an event/time event item, the
setting for that segment is cleared.
(11) Entry of values currently being entered completed without be-
ing stored to memory.
(12) When
FUNC
+
ENT
are pressed at a pattern item, the display
changes to the segment insert/delete screen, and “
I
n
S
.
” is
blinks.
However, note that
FUNC
+
ENT
is disabled for currently run-
ning programs.
(13) “
d
E
L
.
” displayed blinking by
, and “
I
n
S
.
” displayed
blinking by
.
(14) If
ENT
is pressed at the “
I
n
S
.
” display, a segment is inserted.
If
ENT
is pressed, a segment is “
d
E
L
.
”.
If
DISP
is pressed, neither of segment delete or insert are carried
out.
