Azbil DCP31, Руководство пользователя

Страница: 210 / 242

9-10
Chapter 9. MAINTENANCE & TROUBLESHOOTING
■
G.Soak items cannot be displayed by repeatedly pressing in
program setup state
Cause Remedy
Programming items are set to “display
OFF”. Set setup data
C 7 0
setting to 0.
■
PV start items, cycle items and pattern link items cannot be displayed
by repeatedly pressing in program setup state
Cause Remedy
Programming items are set to “display
OFF”. Set setup data
C 7 1
setting to 0.
■
Insertion/deletion of segments cannot be confirmed by pressing
FUNC
+
ENT
in program setup state
Cause Remedy
The program setup cannot be changed. Set program parameter
P R T C
setting to 0.
The program being set up is being oper-
ated (RUN. HOLD, FAST, END). Reset the controller.
Not pattern item on programming map Move to pattern item on programming map.
Pattern item of non-set segment on pro-
gramming map Either move to already set up segment, or set up
segment.
■
Program deletion cannot be confirmed by pressing
FUNC
+
CLR
while en-
tering pattern items in program setup state
Cause Remedy
The program being set up is being oper-
ated (RUN. HOLD, FAST, END). Reset the controller.