5-19
Chapter 5. FUNCTIONS
■
Mode transition operations
The following describes mode transition operations:
Though “program end” is not an operation, it is described below as
it is a factor in mode transition.
●
●
RUN
This operation involves shifting to the RUN mode from the READY,
HOLD or FAST modes. To shift from the READY mode to the RUN
mode, the
DCP31
must be in the basic display state even in key,
external switch input or communication operations.
●
●
HOLD
This operation involves shifting to the HOLD mode from the RUN
or FAST modes.
The HOLD mode is not available in the constant-value operation
mode.
●
●
RESET
This operation involves shifting to the READY mode from the
RUN, HOLD, FAST or END modes.
In the program operation mode, this mode includes returning to the
No.1 segment.
●
●
ADV
This operation involves advancing one segment in the READY,
RUN, HOLD or FAST modes.
The ADV mode is not available in the constant-value operation
mode.
●
●
FAST
This operation involves shifting to the FAST mode from the RUN or
HOLD modes.
The FAST mode is not available in the constant-value operation
mode.
●
●
AUTO
This operation involves shifting to the AUTO mode from the
MANUAL mode.
