5-17
Chapter 5. FUNCTIONS
●
●
END
In this mode, operation of the program has ended.
MV outputs are active in PID control or ON-OFF control, and
events and time events are active with program operation stopped at
the program end point.
The END mode is not available during constant-value operation.
●
●
AUTO
In this mode, program operation is automatic.
MV output is active according to controller control.
(However, note that when programmer functions are selected on 5G
output models, SP output is active according to controller control.)
●
●
MANUAL
In this mode, program operation is manual.
MV output can be changed by
,
,
,
on the console
or communications.
(However, note that when programmer functions are selected on 5G
output models, SP output can be changed by
,
,
,
on the console or communications.)
