Azbil DCP31, Руководство пользователя

Страница: 196 / 242

8-18
Chapter 8. PROGRAM SETUP
● ●
Display
• In the above procedure,
FUNC
+
CLR
are pressed while entering
values (SP setting value) to the No.1 setup. However, the program
can also be deleted by pressing
FUNC
+
CLR
while entering values
(time setting value) to the No.2 setup.
• “- - - -” is displayed for the SP and time setting values in non-set
segments.
• Currently running (RUN, HOLD, FAST, END) programs cannot
be deleted.
■
Inserting and deleting segments
(1) In the setting display state, move to the pattern item of the
segment where the segment is to be inserted or deleted on the
programming map.
(2) If you press
FUNC
+
CLR
, the display changes to confirm inser-
tion of the segment, and “
I N S .
” is displayed blinking in the
upper display.
(3) If you press , the display changes to confirm insertion of the
segment, and “
I N S .
” is displayed blinking in the upper display.
If you press , the display changes to confirm deletion of the
segment, and “
D E L .
” is displayed blinking in the upper display.
(4) If you press
ENT
while “
I N S .
” is displayed on the upper display,
the segment is inserted.
If you press
ENT
while “
D E L .
” is displayed on the upper dis-
play, the segment is deleted.
(5) The
DCP31
returns to the setting display state.
Program No. Segment No.
Pattern
tendency
EV1 to EV3 and T1 to T5 all out
C L R.